The Machining & Welding 7/16 IN Wire Rope Ferrule is sized to match 7/16 inch wire rope, giving you a carbon steel sleeve for a compression swage termination.

Swage ferrules are a common way to terminate wire rope ends quickly and consistently, provided the correct tooling and technique are used during the swage.

Material choice between carbon and stainless steel lets you match the ferrule to the wire rope's own material and the assembly's environment.

A properly swaged ferrule can achieve close to the full breaking strength of the wire rope, which loose clips generally cannot match.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The specifications below cover everything you need to check compatibility with your equipment.

Add the Machining & Welding 7/16 IN Wire Rope Ferrule to your wire rope termination supplies.

Product Info:
•  Wire Rope Diameter: 7/16 in
•  Ferrule Outer Diameter: 0.875 in
•  Ferrule Length: 1.625 in
•  Material: Carbon steel
•  Shipping Weight: 0.23 lbs