The Machining & Welding 7 Ton 5 FT Modular Spreader gives you 7 ton of capacity in a 5 foot section that combines with other modular sections to match your load.

This section is built to connect with other modular spreader sections, so you can build a custom length on the fly for oversized or irregular loads.

A bolted connection at each end lets sections join securely, with the rated capacity engineered to carry through the full assembled length.

This approach is common in facilities that need to rig long or oversized loads only occasionally, since it avoids buying a dedicated long beam that sits unused most of the time.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 7 Ton 5 FT Modular Spreader to expand your modular spreader beam inventory.

Product Info:
•  Capacity: 7 ton
•  Beam Length: 5 ft
•  Minimum Top Rigging Angle: 45 degrees
•  Style: Modular, bolt-together sections
•  Shipping Weight: 43 lbs