Built as a modular section, the Machining & Welding 6.5 Ton 6 FT Modular Spreader adds 6 feet of spread at a 6.5 ton rating, and connects to matching sections to build longer spans.

This section is built to connect with other modular spreader sections, so you can build a custom length on the fly for oversized or irregular loads.

The section is fabricated from structural steel with a bolted end connection, rated to hold the full working load limit when joined to compatible sections.

This approach is common in facilities that need to rig long or oversized loads only occasionally, since it avoids buying a dedicated long beam that sits unused most of the time.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 6.5 Ton 6 FT Modular Spreader to expand your modular spreader beam inventory.

Product Info:
•  Capacity: 6.5 ton
•  Beam Length: 6 ft
•  Minimum Top Rigging Angle: 45 degrees
•  Style: Modular, bolt-together sections
•  Shipping Weight: 49 lbs