Built for consistent, repeatable lifts, the Machining & Welding 60000 LB 25 FT Fixed Spreader Beam spans 25 feet at a 60,000 pound working load limit.

This beam suits loads that are wider than a single sling point can safely support, spreading the rigging to keep the load level and the sling angles closer to vertical.

The beam is fabricated from structural steel with swivel hook connections, engineered to hold the full rated capacity across its length.

Spreading the rigging with a beam like this reduces sling angle stress compared to picking directly from a single hook.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 60000 LB 25 FT Fixed Spreader Beam for a straightforward 25 foot spreader beam rated to 60,000 pounds.

Product Info:
•  Working Load Limit: 60,000 lbs
•  Beam Length: 25 ft
•  Connection: SHACKLE CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 1493 lbs