Built for consistent, repeatable lifts, the Machining & Welding 60000 LB 16 FT Fixed Spreader Beam spans 16 feet at a 60,000 pound working load limit.

This beam suits loads that are wider than a single sling point can safely support, spreading the rigging to keep the load level and the sling angles closer to vertical.

Steel construction throughout keeps deflection low under load, and the swivel connections allow the rigging to settle naturally as the load lifts.

For loads that always fall within a known width range, a fixed spreader beam is a simple, dependable choice.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The specifications below cover everything you need to check compatibility with your equipment.

Add the Machining & Welding 60000 LB 16 FT Fixed Spreader Beam to your rigging inventory for dependable, repeatable spreader lifts.

Product Info:
•  Working Load Limit: 60,000 lbs
•  Beam Length: 16 ft
•  Connection: SHACKLE CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 635 lbs