At 24 inches and 6,000 pounds capacity, the Machining & Welding 6000 LB X 24 IN Lift Beam is sized for tight-quarter lifts where a long beam would not fit or would not be needed.

A 3/4 inch bottom shackle connects directly to your sling or chain, making it easy to rig the beam between a hoist hook and a load with two pick points.

The beam is fabricated as a single rigid piece, which keeps it simple to inspect and quick to put into service compared to adjustable designs.

This is a practical choice when you need a dedicated beam for a specific, recurring lift rather than a general purpose adjustable unit.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

With nothing to adjust and shackles already in place, the Machining & Welding 6000 LB X 24 IN Lift Beam is about as quick to put into service as a lift beam gets.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Beam Length: 24 in
•  Bottom Shackle Size: 3/4 in
•  Frame Material: Structural steel
•  Shipping Weight: 48 lbs