The Machining & Welding 6000 LB Material Dump Basket 48X120 IN gives you a 48 in x 120 in steel basket rated to 6,000 pounds for material handling by crane or hoist.

Rigging attaches to the basket's lift points, letting a crane or hoist move the loaded basket between work areas, storage, and disposal points.

The basket is fabricated from structural steel mesh or solid panel sides, with lift points engineered to hold the full rated capacity.

This is standard equipment for any site that regularly needs to move material by crane rather than by hand or vehicle.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding 6000 LB Material Dump Basket 48X120 IN is ready to move material safely and efficiently by crane.

Product Info:
•  Capacity: 6,000 lbs
•  Size: 48 in x 120 in
•  Configuration: Dump Style
•  Rated For: Material handling only, not for personnel lifting
•  Shipping Weight: 1500 lbs