The Machining & Welding 6000 LB 20 FT Standard Lift Beam is sized at 20 feet with a 6,000 pound rating, a solid choice for standard two-point lifts.

Swivel hooks at each end let you attach chain or wire rope slings quickly and allow the rigging to rotate naturally as the load settles.

The beam is fabricated from structural steel and finished for daily shop use, with swivel hooks welded or pinned securely at both ends.

This is the type of beam most shops keep several of on hand, since it covers the bulk of everyday two-point lifting needs.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

With swivel hooks ready to rig, the Machining & Welding 6000 LB 20 FT Standard Lift Beam is set to go the moment the next lift comes up.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Beam Length: 20 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 1295 lbs