When a single hoist cannot safely support a load's length or weight, the Machining & Welding 6000 LB 14 FT Twin Hoist Lift Beam lets two hoists share the lift, spanning 14 feet at 6,000 pounds working load limit.

By running two hoists on one beam, you can lift and lower each end independently, which is useful for tilting a load into position or leveling it as you go.

The beam top is designed to accept two hoist trolleys or hooks, spaced to match common twin-hoist crane configurations.

For structural steel, piping, and long machine components, a twin hoist beam is often the safest way to keep the load level from pick to placement.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

With swivel latch hooks at both ends, the Machining & Welding 6000 LB 14 FT Twin Hoist Lift Beam is set up for smooth, controlled twin hoist lifts.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Beam Length: 14 ft
•  End Fittings: Swivel latch hooks
•  Style: Twin hoist, dual lift point
•  Frame Material: Structural steel
•  Shipping Weight: 600 lbs