The Machining & Welding 5/8 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 5/8 inch wire rope, built from carbon steel.

Wire rope assemblies use threaded studs at one or both ends when the application calls for a bolted or threaded connection rather than a hook or loop.

Manufactured to consistent tolerances, the fitting swages onto the wire rope with a rated holding strength that matches the rope it is paired with.

These are precision components, and ordering the exact size and specification avoids a costly reswage if the fitting does not match your hardware.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 5/8 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 5/8 in
•  Material: Carbon steel
•  Shipping Weight: 3.23 lbs