Built as an H-frame rather than a simple straight beam, the Machining & Welding 4000 LB 4 FT Economy H-Beam covers 10 by 4 feet at 4,000 pounds capacity, ideal for loads that need support on more than one axis.

The H-shaped frame provides pick points on both the width and length of the load, keeping wide crates, panels, tanks, and skids level and stable during the lift.

Steel construction throughout gives the frame the stiffness needed to keep a wide load level, even when weight is not perfectly centered.

This style of beam is a practical fit for shops that regularly move wide or irregularly shaped equipment and need a stable, repeatable rigging setup.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

With lift points on two axes, the Machining & Welding 4000 LB 4 FT Economy H-Beam takes the guesswork out of rigging oddly shaped loads.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Frame Width: 10 ft
•  Frame Length: 4 ft
•  Style: H-frame, four-point lifting
•  Frame Material: Structural steel
•  Shipping Weight: 425 lbs