The Machining & Welding 4000 LB 4 FT Basket Lifting Beam offers 4 feet of length and 4,000 pounds of capacity, set up for basket-style rigging.

The two sets of hooks let you rig a basket hitch around the load, which distributes weight across four legs rather than a single center pick.

Steel construction and dual hook sets keep the rigging geometry consistent, load after load.

Distributing the load across four sling legs instead of two can reduce stress on individual slings.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 4000 LB 4 FT Basket Lifting Beam to your rigging for loads that call for a basket-style pick.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 4 ft
•  End Fittings: Two sets of hooks
•  Frame Material: Structural steel
•  Shipping Weight: 110 lbs