Built for consistent, repeatable lifts, the Machining & Welding 4000 LB 16 FT Fixed Spreader Beam spans 16 feet at a 4,000 pound working load limit.

This beam suits loads that are wider than a single sling point can safely support, spreading the rigging to keep the load level and the sling angles closer to vertical.

As a fixed length design, there is no adjustment mechanism to inspect, just a solid steel beam ready to rig.

Spreading the rigging with a beam like this reduces sling angle stress compared to picking directly from a single hook.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

The Machining & Welding 4000 LB 16 FT Fixed Spreader Beam is ready to spread your rigging and keep the next lift level.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 16 ft
•  Connection: SWIVEL HOOK CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 180 lbs