The Machining & Welding 4000 LB 10 FT Standard Lift Beam covers 10 feet at 4,000 pounds capacity, giving your crew a reliable beam for daily lifting tasks.

The swivel hook connections reduce twisting in the sling legs during the lift, keeping the rigging aligned from pickup to set-down.

A durable finish protects the steel from everyday wear, keeping the beam in service through repeated daily lifts.

A standard fixed length beam is often the simplest and most reliable choice for lifts that do not vary much from one job to the next.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding 4000 LB 10 FT Standard Lift Beam is ready to handle the two-point lifts that come up on nearly every shift.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 10 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 295 lbs