The Machining & Welding 31 Ton 20 FT Modular Spreader gives you 31 ton of capacity in a 20 foot section that combines with other modular sections to match your load.

Modular spreader systems let you bolt sections together to reach the exact length a load requires, rather than stocking a separate fixed beam for every dimension.

The section is fabricated from structural steel with a bolted end connection, rated to hold the full working load limit when joined to compatible sections.

Building spread length from sections instead of a single fixed beam gives you more flexibility as load sizes change from job to job.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 31 Ton 20 FT Modular Spreader to expand your modular spreader beam inventory.

Product Info:
•  Capacity: 31 ton
•  Beam Length: 20 ft
•  Minimum Top Rigging Angle: 45 degrees
•  Style: Modular, bolt-together sections
•  Shipping Weight: 830 lbs