The Machining & Welding 30000 LB Indexing Beam Grab is an indexing beam grab rated to 30,000 pounds, adjusting from 7 to 17 inches.

The indexing mechanism automatically adjusts the grip to match the section size, so operators do not need to manually reset the grab between different sized loads.

Steel construction and an indexing jaw design keep this grab secure across varied section sizes without manual adjustment.

A wide adjustable range means one grab covers more of your daily lifting needs than a fixed-size tool.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

Order the Machining & Welding 30000 LB Indexing Beam Grab rated to 30,000 pounds for 7 to 17 inch sections.

Product Info:
•  Capacity: 30,000 lbs
•  Grab Type: Beam
•  Minimum: 7 in
•  Maximum: 17 in
•  Shipping Weight: 180 lbs