The Machining & Welding 20000 LB 21-30 FT Adj Spreader Beam is an adjustable spreader beam rated to 20,000 pounds, extending across 21 ft to 30 ft.

Because the length adjusts, one beam covers a range of load widths instead of requiring a separate fixed beam for every dimension.

The beam telescopes or pins out to length, with a locking mechanism that holds the setting securely under the full rated load.

This design lets you match the beam to the load rather than the other way around, which keeps rigging angles under control.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 20000 LB 21-30 FT Adj Spreader Beam to cover a wider range of load widths with a single beam.

Product Info:
•  Working Load Limit: 20,000 lbs
•  Adjustable Length Range: 21 ft to 30 ft
•  Connection: SWIVEL HOOK CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 1160 lbs