The Machining & Welding 20000 LB 20 FT Fixed Spreader Beam spreads your rigging across 20 feet, rated to 20,000 pounds.

A fixed length beam like this is a straightforward choice for recurring lifts where the load dimensions do not change from one job to the next.

Steel construction throughout keeps deflection low under load, and the swivel connections allow the rigging to settle naturally as the load lifts.

Spreading the rigging with a beam like this reduces sling angle stress compared to picking directly from a single hook.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding 20000 LB 20 FT Fixed Spreader Beam is ready to spread your rigging and keep the next lift level.

Product Info:
•  Working Load Limit: 20,000 lbs
•  Beam Length: 20 ft
•  Connection: SWIVEL HOOK CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 475 lbs