At 12 inches and 2,000 pounds capacity, the Machining & Welding 2000 LB X 12 IN Lift Beam is sized for tight-quarter lifts where a long beam would not fit or would not be needed.

A 5/8 inch bottom shackle connects directly to your sling or chain, making it easy to rig the beam between a hoist hook and a load with two pick points.

Constructed from structural steel and finished to hold up to daily shop use, the beam is built as a fixed unit with no moving parts to maintain.

For loads that always fall within a narrow size range, a fixed length beam like this is simpler and often more affordable than an adjustable model.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding 2000 LB X 12 IN Lift Beam gives your crew a dependable, grab and go option for shorter, two-point lifts.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Beam Length: 12 in
•  Bottom Shackle Size: 5/8 in
•  Frame Material: Structural steel
•  Shipping Weight: 18 lbs