Built for slung or basket picks, the Machining & Welding 2000 LB 12 FT Basket Lifting Beam spans 12 feet at 2,000 pounds, with hooks positioned for a secure basket hitch.

This beam suits pipe, coils, bundles, and other loads that benefit from a basket-style sling configuration instead of a straight vertical pick.

The beam is fabricated from structural steel with hooks positioned at each end, engineered to carry the full working load limit through a basket configuration.

A basket hitch is often the safer choice for loads that could roll, shift, or slide out of a straight vertical sling.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 2000 LB 12 FT Basket Lifting Beam for a 12 foot basket beam rated to 2,000 pounds.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Beam Length: 12 ft
•  End Fittings: Two sets of hooks
•  Frame Material: Structural steel
•  Shipping Weight: 245 lbs