The Machining & Welding 150000 LB 10 FT Fixed Spreader Beam spreads your rigging across 10 feet, rated to 150,000 pounds.

A fixed length beam like this is a straightforward choice for recurring lifts where the load dimensions do not change from one job to the next.

Steel construction throughout keeps deflection low under load, and the swivel connections allow the rigging to settle naturally as the load lifts.

Spreading the rigging with a beam like this reduces sling angle stress compared to picking directly from a single hook.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 150000 LB 10 FT Fixed Spreader Beam for a straightforward 10 foot spreader beam rated to 150,000 pounds.

Product Info:
•  Working Load Limit: 150,000 lbs
•  Beam Length: 10 ft
•  Connection: SHACKLE CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 1264 lbs