The Machining & Welding 15000 LB 6 FT Standard Lift Beam is a fixed length, general purpose lift beam built for everyday overhead lifting. At 6 feet long, it carries a 15,000 pound working load limit.

This beam is a good match for crates, machinery, structural steel, and general freight where a simple two-point pick keeps the load level.

The swivel hooks are rated to match the beam's overall working load limit, so the whole assembly is engineered as one system.

Choosing the right fixed length up front keeps this beam ready to grab and use, without adjustment steps before every lift.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 15000 LB 6 FT Standard Lift Beam to your rack as the go-to beam for straightforward, everyday overhead lifting.

Product Info:
•  Working Load Limit: 15,000 lbs
•  Beam Length: 6 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 365 lbs