The Machining & Welding 1/4 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1/4 inch wire rope, swaged onto a 1.5 inch stud with 1/2 inch coarse thread and a right-hand thread direction.

Threaded studs like this terminate a wire rope end with a machine thread instead of a hook or eye, letting you thread the assembly directly into a fitting, turnbuckle, or clevis.

Manufactured to consistent tolerances, the fitting swages onto the wire rope with a rated holding strength that matches the rope it is paired with.

Choosing left-hand or right-hand thread correctly prevents an assembly from backing itself loose in service, which is why this detail is called out specifically.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 1/4 IN Wire Rope Thr Stud to your wire rope assembly parts inventory.

Product Info:
•  Wire Rope Diameter: 1/4 in
•  Stud Length: 1.5 in
•  Thread Size: 1/2 in
•  Thread Pitch: Coarse
•  Thread Hand: Right-hand
•  Material: Carbon steel
•  Shipping Weight: 0.21 lbs