The Machining & Welding 1/4 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1/4 inch wire rope, swaged onto a 1.5 inch stud with 1/2 inch fine thread and a right-hand thread direction.

Threaded studs like this terminate a wire rope end with a machine thread instead of a hook or eye, letting you thread the assembly directly into a fitting, turnbuckle, or clevis.

The stud is precision machined to match its rated wire rope diameter, with thread dimensions cut to standard specifications for a secure fit into mating hardware.

Choosing left-hand or right-hand thread correctly prevents an assembly from backing itself loose in service, which is why this detail is called out specifically.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 1/4 IN Wire Rope Thr Stud to your wire rope assembly parts inventory.

Product Info:
•  Wire Rope Diameter: 1/4 in
•  Stud Length: 1.5 in
•  Thread Size: 1/2 in
•  Thread Pitch: Fine
•  Thread Hand: Right-hand
•  Material: Carbon steel
•  Shipping Weight: 0.16 lbs