Built from stainless steel, the Machining & Welding 1/4 IN Wire Rope Ferrule swages onto 1/4 inch wire rope to form a rated eye or splice.

Ferrules like this compress around a wire rope loop to form a rated eye termination, a standard method for creating slings and rigging assemblies in house.

Material choice between carbon and stainless steel lets you match the ferrule to the wire rope's own material and the assembly's environment.

Keeping the right size ferrule on hand for each wire rope diameter you work with speeds up assembly and repair work in house.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 1/4 IN Wire Rope Ferrule to your wire rope termination supplies.

Product Info:
•  Wire Rope Diameter: 1/4 in
•  Ferrule Outer Diameter: 0.75 in
•  Ferrule Length: 1.5 in
•  Material: Stainless steel
•  Shipping Weight: 0.18 lbs