The Machining & Welding 1/4 IN 3200 LB Alloy Flat Hook offers 3,200 pounds of capacity in a flat bottom hook style, sized for 1/4 inch chain.

This hook style is common where the connection point is a flat bar, plate, or link rather than a standard round chain link.

The hook shape is engineered for a specific seating style, so the connection stays secure rather than sliding under tension.

A properly seated hook distributes load more evenly than one that only makes partial contact with its connection point.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 1/4 IN 3200 LB Alloy Flat Hook rated to 3,200 pounds with a flat bottom design.

Product Info:
•  Working Load Limit: 3,200 lbs
•  Wire Diameter: 1/4 in
•  Style: A
•  Bottom: Flat bottom
•  Shipping Weight: 1.5 lbs