The Machining & Welding 1/2 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1/2 inch wire rope, swaged onto a 2.25 inch stud with 7/8 inch coarse thread and a left-hand thread direction.

Threaded studs like this terminate a wire rope end with a machine thread instead of a hook or eye, letting you thread the assembly directly into a fitting, turnbuckle, or clevis.

Consistent thread dimensions and swage geometry keep this fitting compatible with standard wire rope assembly equipment and mating hardware.

These are precision components, and ordering the exact size and specification avoids a costly reswage if the fitting does not match your hardware.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Order the Machining & Welding 1/2 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 1/2 in
•  Stud Length: 2.25 in
•  Thread Size: 7/8 in
•  Thread Pitch: Coarse
•  Thread Hand: Left-hand
•  Material: Carbon steel
•  Shipping Weight: 1 lbs