The Machining & Welding 1/2 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1/2 inch wire rope, swaged onto a 2.25 inch stud with 7/8 inch fine thread and a right-hand thread direction.

This fitting is swaged onto the rope end during assembly, creating a permanent, rated termination that accepts standard threaded hardware on the other end.

The stud is precision machined to match its rated wire rope diameter, with thread dimensions cut to standard specifications for a secure fit into mating hardware.

Choosing left-hand or right-hand thread correctly prevents an assembly from backing itself loose in service, which is why this detail is called out specifically.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 1/2 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 1/2 in
•  Stud Length: 2.25 in
•  Thread Size: 7/8 in
•  Thread Pitch: Fine
•  Thread Hand: Right-hand
•  Material: Stainless steel
•  Shipping Weight: 1 lbs