The Machining & Welding 10000 LB 6 FT Standard Lift Beam is sized at 6 feet with a 10,000 pound rating, a solid choice for standard two-point lifts.

A fixed length beam like this is easy to keep on hand for the recurring lifts that make up most of a shop's daily workload.

Steel construction throughout gives the beam the rigidity to carry its full rated capacity without excessive deflection under load.

A standard fixed length beam is often the simplest and most reliable choice for lifts that do not vary much from one job to the next.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 10000 LB 6 FT Standard Lift Beam for a fixed length beam built to do one job well, over and over.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Beam Length: 6 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 345 lbs