Built as a straightforward workhorse beam, the Machining & Welding 1000 LB 16 FT Standard Lift Beam offers 16 feet of length and a 1,000 pound working load limit.

Because the hooks swivel, you can adjust sling angle slightly without fighting the rigging, which speeds up positioning over the load.

Steel construction throughout gives the beam the rigidity to carry its full rated capacity without excessive deflection under load.

A standard fixed length beam is often the simplest and most reliable choice for lifts that do not vary much from one job to the next.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

The Machining & Welding 1000 LB 16 FT Standard Lift Beam is ready to handle the two-point lifts that come up on nearly every shift.

Product Info:
•  Working Load Limit: 1,000 lbs
•  Beam Length: 16 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 313 lbs