The Machining & Welding 1000 LB 12 IN-48 IN Adj Economy gives shops an economical way to handle varying load widths, adjusting between 12 and 48 inches at a 1,000 pound rating.

The included shackles make it easy to connect slings on both ends, and the adjustable spread lets you dial in the exact width your load needs.

The beam uses a telescoping steel tube design with a pin lock, keeping the adjustment mechanism simple and low maintenance.

Keeping shackles attached at both ends reduces the parts you need to track and reduces setup time before each lift.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding 1000 LB 12 IN-48 IN Adj Economy is built for shops that need flexibility on a budget, not just a single fixed-width beam.

Product Info:
•  Working Load Limit: 1,000 lbs
•  Adjustable Length Range: 12 in to 48 in
•  End Fittings: Shackles, included
•  Frame Material: Structural steel
•  Shipping Weight: 45 lbs