The Machining & Welding 1 IN 4600 LB Alloy Stirrup Hook is an alloy steel stirrup hook built from 1 inch stock, rated to 4,600 pounds with a 12 inch reach.

The wide throat opening on a stirrup hook speeds up connection to oversized rigging hardware compared to threading a narrower hook into place.

The hook is manufactured to a consistent reach and throat dimension, keeping it interchangeable with others of the same size.

A wider throat opening reduces the fumbling that comes with trying to fit a standard hook onto an oversized connection point.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding 1 IN 4600 LB Alloy Stirrup Hook is ready to connect quickly to oversized rigging hardware.

Product Info:
•  Working Load Limit: 4,600 lbs
•  Wire Diameter: 1 in
•  Hook Reach: 12 in
•  Shipping Weight: 10 lbs