The Machining & Welding 1-3/8 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1-3/8 inch wire rope, swaged onto a 8.25 inch stud with 2-3/4 inch coarse thread and a right-hand thread direction.

This fitting is swaged onto the rope end during assembly, creating a permanent, rated termination that accepts standard threaded hardware on the other end.

The stud is precision machined to match its rated wire rope diameter, with thread dimensions cut to standard specifications for a secure fit into mating hardware.

Choosing left-hand or right-hand thread correctly prevents an assembly from backing itself loose in service, which is why this detail is called out specifically.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 1-3/8 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 1-3/8 in
•  Stud Length: 8.25 in
•  Thread Size: 2-3/4 in
•  Thread Pitch: Coarse
•  Thread Hand: Right-hand
•  Shipping Weight: 30.5 lbs