Built from carbon steel, the Machining & Welding 1-3/8 IN Wire Rope Ferrule swages onto 1-3/8 inch wire rope to form a rated eye or splice.

This sleeve is swaged with a hydraulic press to permanently secure a wire rope loop, eliminating the need for clips or knots at the termination point.

Consistent wall thickness and bore diameter keep the swage strength predictable from one ferrule to the next.

Matching ferrule material to wire rope material avoids galvanic corrosion between dissimilar metals in outdoor or wet environments.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

The Machining & Welding 1-3/8 IN Wire Rope Ferrule is ready to swage onto your next wire rope assembly.

Product Info:
•  Wire Rope Diameter: 1-3/8 in
•  Ferrule Outer Diameter: 2.75 in
•  Ferrule Length: 6.5 in
•  Material: Carbon steel
•  Shipping Weight: 9.24 lbs