Built for 3/8 inch wire rope, the Machining & Welding 1-3/8 IN Teacup Ferrule Fitting forms a teacup shaped termination for pipe handling rigging.

Rigging shops use fittings like this to build custom-length pipe lifting slings rather than special-ordering a complete assembly.

Consistent manufacturing tolerances keep this fitting's fit and rated capacity predictable across a production run.

Keeping spare fittings on hand means a worn or damaged termination does not take an entire pipe lifting sling out of service.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 1-3/8 IN Teacup Ferrule Fitting sized to match your wire rope diameter.

Product Info:
•  Wire Rope Diameter: 3/8 in
•  Shipping Weight: 12.6 lbs