The Machining & Welding 1-1/8 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1-1/8 inch wire rope, swaged onto a 6.75 inch stud with 2-1/4 inch coarse thread and a left-hand thread direction.

Threaded studs like this terminate a wire rope end with a machine thread instead of a hook or eye, letting you thread the assembly directly into a fitting, turnbuckle, or clevis.

Manufactured to consistent tolerances, the fitting swages onto the wire rope with a rated holding strength that matches the rope it is paired with.

Getting the thread size, pitch, and hand correct matters, since a mismatched stud will not thread into its mating hardware even if the wire rope size is right.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

The Machining & Welding 1-1/8 IN Wire Rope Thr Stud is ready to terminate your wire rope with a threaded connection.

Product Info:
•  Wire Rope Diameter: 1-1/8 in
•  Stud Length: 6.75 in
•  Thread Size: 2-1/4 in
•  Thread Pitch: Coarse
•  Thread Hand: Left-hand
•  Shipping Weight: 15.63 lbs