The Machining & Welding 1-1/8 IN Wire Rope Ferrule is sized to match 1-1/8 inch wire rope, giving you a carbon steel sleeve for a compression swage termination.

Swage ferrules are a common way to terminate wire rope ends quickly and consistently, provided the correct tooling and technique are used during the swage.

Consistent wall thickness and bore diameter keep the swage strength predictable from one ferrule to the next.

Matching ferrule material to wire rope material avoids galvanic corrosion between dissimilar metals in outdoor or wet environments.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding 1-1/8 IN Wire Rope Ferrule sized to match your wire rope diameter and material.

Product Info:
•  Wire Rope Diameter: 1-1/8 in
•  Ferrule Outer Diameter: 2.25 in
•  Ferrule Length: 4.81 in
•  Material: Carbon steel
•  Shipping Weight: 4.6 lbs