The Machining & Welding 1-1/4 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1-1/4 inch wire rope, swaged onto a 7.5 inch stud with 2-1/2 inch coarse thread and a left-hand thread direction.

This fitting is swaged onto the rope end during assembly, creating a permanent, rated termination that accepts standard threaded hardware on the other end.

Manufactured to consistent tolerances, the fitting swages onto the wire rope with a rated holding strength that matches the rope it is paired with.

These are precision components, and ordering the exact size and specification avoids a costly reswage if the fitting does not match your hardware.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 1-1/4 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 1-1/4 in
•  Stud Length: 7.5 in
•  Thread Size: 2-1/2 in
•  Thread Pitch: Coarse
•  Thread Hand: Left-hand
•  Shipping Weight: 21 lbs