The Machining & Welding 1-1/4 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1-1/4 inch wire rope, swaged onto a 7.5 inch stud with 2-1/2 inch fine thread and a left-hand thread direction.

This fitting is swaged onto the rope end during assembly, creating a permanent, rated termination that accepts standard threaded hardware on the other end.

Manufactured to consistent tolerances, the fitting swages onto the wire rope with a rated holding strength that matches the rope it is paired with.

Choosing left-hand or right-hand thread correctly prevents an assembly from backing itself loose in service, which is why this detail is called out specifically.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding 1-1/4 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 1-1/4 in
•  Stud Length: 7.5 in
•  Thread Size: 2-1/2 in
•  Thread Pitch: Fine
•  Thread Hand: Left-hand
•  Shipping Weight: 21 lbs