The Machining & Welding 1-1/4 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1-1/4 inch wire rope, swaged onto a 6.25 inch stud with 2-1/2 inch fine thread and a left-hand thread direction.

Threaded studs like this terminate a wire rope end with a machine thread instead of a hook or eye, letting you thread the assembly directly into a fitting, turnbuckle, or clevis.

Consistent thread dimensions and swage geometry keep this fitting compatible with standard wire rope assembly equipment and mating hardware.

These are precision components, and ordering the exact size and specification avoids a costly reswage if the fitting does not match your hardware.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding 1-1/4 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 1-1/4 in
•  Stud Length: 6.25 in
•  Thread Size: 2-1/2 in
•  Thread Pitch: Fine
•  Thread Hand: Left-hand
•  Shipping Weight: 24.69 lbs