The Machining & Welding 1-1/4 IN Wire Rope Ferrule is sized to match 1-1/4 inch wire rope, giving you a stainless steel sleeve for a compression swage termination.

Swage ferrules are a common way to terminate wire rope ends quickly and consistently, provided the correct tooling and technique are used during the swage.

Consistent wall thickness and bore diameter keep the swage strength predictable from one ferrule to the next.

Matching ferrule material to wire rope material avoids galvanic corrosion between dissimilar metals in outdoor or wet environments.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 1-1/4 IN Wire Rope Ferrule to your wire rope termination supplies.

Product Info:
•  Wire Rope Diameter: 1-1/4 in
•  Ferrule Outer Diameter: 2.5 in
•  Ferrule Length: 5.875 in
•  Material: Stainless steel
•  Shipping Weight: 6.79 lbs