The Machining & Welding 1-1/2 IN Wire Rope Ferrule is sized to match 1-1/2 inch wire rope, giving you a carbon steel sleeve for a compression swage termination.

Ferrules like this compress around a wire rope loop to form a rated eye termination, a standard method for creating slings and rigging assemblies in house.

Consistent wall thickness and bore diameter keep the swage strength predictable from one ferrule to the next.

Matching ferrule material to wire rope material avoids galvanic corrosion between dissimilar metals in outdoor or wet environments.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding 1-1/2 IN Wire Rope Ferrule sized to match your wire rope diameter and material.

Product Info:
•  Wire Rope Diameter: 1-1/2 in
•  Ferrule Outer Diameter: 3 in
•  Ferrule Length: 7.125 in
•  Material: Carbon steel
•  Shipping Weight: 11.97 lbs