Drum Anchor Screw “ SKU: 607 The Small Fastener That Keeps Your Web Strap Locked to the Drum In a web strap ratchet winch hoist, every component has a purpose ” and the Drum Anchor Screw (SKU: 607) is the critical fastener that secures the web strap directly to the drum. Small in size, essential in function: without a properly seated drum anchor screw, the strap loop cannot be anchored to the drum, and the hoist cannot wind, store, or control the strap under load. This drum anchor screw is compatible with Lug-All hoist models 25-A, 25-B, 25-i, 2-A, 2-B, 500-A, 500-i, 500-A-FH, 1000-A, and 1500-A ” covering the complete small frame and Lightweight web strap hoist lineup from ¼-ton to 1½-ton capacity. Lug-All The drum anchor screw passes through the anchor hole in the drum hub and threads through the stitched loop at the inner end of the web strap, mechanically locking the strap to the drum. When installing a new web strap, the drum anchor screw is inserted through the anchor hole in the drum and the loop in the strap, then tightened with the appropriate hex wrench or Phillips screwdriver until snug, then turned an additional quarter-turn. This precise installation method ensures the strap is held firmly at the correct tension without over-torquing the fastener. Lug-All Depending on the hoist model, removal of the drum anchor screw requires a 3/16-inch hex wrench, a 5/32-inch hex wrench, or a Phillips head screwdriver. It is one of the first components removed during web strap replacement and one of the last reinstalled ” making it a frequently handled part that can experience wear, stripping, or corrosion over time, especially in field conditions involving moisture, dirt, or temperature extremes. Lug-All Anytime you replace the web strap on one of the compatible models, inspecting ” and if necessary replacing ” the drum anchor screw at the same time is a simple best practice that costs virtually nothing but protects the integrity of the entire strap-to-drum connection. A stripped or damaged screw that won't torque to spec compromises the strap anchor, which is a direct load-bearing connection. Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number607Part NameDrum Anchor ScrewCompatible ModelsLug-All #25-A, #25-B, #25-i, #2-A, #2-B, #500-A, #500-i, #500-A-FH, #1000-A, #1500-AHoist TypeWeb Strap Ratchet Winch Hoist (Small Frame & Lightweight)Capacity Range500 lbs “ 3,000 lbs (varies by model)Drive TypeHex (3/16" or 5/32") or Phillips (varies by model)FunctionSecures Web Strap Loop to Drum HubComponent CategoryDrum Hardware / FastenerCountry of OriginUSA

Installation Note Always check that the drum anchor hole is clear and clean before reinstalling. Tighten until snug, then apply an additional quarter-turn ” do not over-tighten. Use the correct tool for your specific model to avoid stripping the head. Order SKU 607 today and ensure your web strap is properly anchored for safe, full-capacity operation.