Lifting Beams

The Machining & Welding 4000 LB 8 FT Economy H-Beam gives you a 6 foot by 8 foot lifting frame rated to 4,000 pounds, built for loads a single straight beam cannot stabilize on its own. The H-shaped...

Built as an H-frame rather than a simple straight beam, the Machining & Welding 4000 LB 8 FT Economy H-Beam covers 4 by 8 feet at 4,000 pounds capacity, ideal for loads that need support on more than...

When a load is too wide for a standard spreader beam, the Machining & Welding 4000 LB 8 FT Economy H-Beam steps in with an H-shaped frame measuring 10 by 8 feet and a 4,000 pound rating. The frame...

The Machining & Welding 4000 LB 8 FT Standard Lift Beam is sized at 8 feet with a 4,000 pound rating, a solid choice for standard two-point lifts. This beam is a good match for crates, machinery,...

The Machining & Welding 4000 LB 8 FT Twin Hoist Lift Beam is built for tandem lifting with two hoists working together. At 8 feet long and rated to 4,000 pounds, it keeps a long or heavy load...

The Machining & Welding 4000 LB 8 FT Ultra Low Headroom is engineered for lifts where every inch of hook height counts. At 8 feet long and rated to 4,000 pounds, it keeps rigging height to a minimum...

The Machining & Welding 4000 LB 84 IN-120 IN Adj Economy is a budget-friendly adjustable lift beam that extends from 84 to 120 inches, rated at 4,000 pounds working load limit. It ships complete with...

The Machining & Welding 4000 LB 96 IN Economy Lift Beam is a fixed length beam at 96 inches, carrying a 4,000 pound working load limit for general purpose lifting jobs. With only 13.5 inches of...

The Machining & Welding 4000 LB Adj Bale Pallet Lifter is a adjustable bale pallet lifter rated to 4,000 pounds, built for with wheels. Facilities with limited floor space or uneven ground use...

The Machining & Welding 4000 LB Adj Base Pallet Lifter gives you 4,000 pounds of rated capacity for crane-suspended pallet handling. This lifter connects to a crane hook and slides under a palletized...

The Machining & Welding 4000 LB Coil Lifter is a standard coil lifter rated to 4,000 pounds, sized for 19.5 in throat, 24.6 in headroom. This lifter grips a coil from the inside diameter or clamps...

Built as a standard design, the Machining & Welding 4000 LB Coil Lifter carries a 4,000 pound working load limit. Steel service centers and metal fabrication shops use coil lifters like this to move...