Lifting & Spreader Beams

The Machining & Welding 80000 LB 5 FT5 IN-7 FT Adj Spreader Beam covers 5 ft 5 in to 7 ft of adjustable spread at 80,000 pounds capacity. This beam is well suited to shops that handle varied loads,...

The Machining & Welding 80000 LB 6 FT Fixed Spreader Beam spreads your rigging across 6 feet, rated to 80,000 pounds. This beam suits loads that are wider than a single sling point can safely...

The Machining & Welding 80000 LB 7 FT-10 FT Adj Spreader Beam covers 7 ft to 10 ft of adjustable spread at 80,000 pounds capacity. Because the length adjusts, one beam covers a range of load widths...

Built to match varying load widths, the Machining & Welding 80000 LB 7 FT-10 FT Adj Spreader Beam adjusts from 7 ft to 10 ft at a 80,000 pound working load limit. Because the length adjusts, one beam...

The Machining & Welding 80000 LB 8 FT Fixed Spreader Beam is a fixed length spreader beam rated to 80,000 pounds at 8 feet. This beam suits loads that are wider than a single sling point can safely...

When a load needs a short spreader rather than a full length beam, the Machining & Welding 80000 LB X 24 IN Lift Beam fills that role at 24 inches with a 80,000 pound working load limit. Bottom...

When a load needs a short spreader rather than a full length beam, the Machining & Welding 80000 LB X 24 IN Lift Beam fills that role at 24 inches with a 80,000 pound working load limit. With a None...

The Machining & Welding 80000 LB X 36 IN Lift Beam is a compact, fixed length lift beam rated for 80,000 pounds at 36 inches, built for jobs where you need a short, sturdy spreader between hook and...

The Machining & Welding 80000 LB X 36 IN Lift Beam is a compact, fixed length lift beam rated for 80,000 pounds at 36 inches, built for jobs where you need a short, sturdy spreader between hook and...

The Machining & Welding 9000 LB Indexing Barrier Grab is an indexing barrier grab rated to 9,000 pounds, adjusting from 6 to 12 inches. Self-indexing jaws close around the load and grip tighter as...

The Machining & Welding 9800 LB Concrete Pipe Teacup is built to lift concrete pipe sections, rated to 9,800 pounds and matched to 3/4 inch wire rope. This teacup fitting seats into the bell end of a...

The Machining & Welding Chlorine Cylinder Lift Beam gives you a rated chlorine cylinder handling solution at 4,000 pounds capacity. Keeping a cylinder secured and upright during a lift matters for...