C-Clip “ SKU: 671 The Snap Washer That Locks U-Frame Shaft Components in Place on Your 3-Ton Hoist Every shaft in a ratchet winch hoist needs axial retention ” a small but non-negotiable component that prevents lateral movement along the shaft under load and vibration. The C-Clip (SKU: 671) is the genuine OEM shaft snap washer used on the U-frame assembly of the Lug-All model 6000-15, providing the axial locking function that keeps critical shaft components in proper operating position. This C-clip is compatible with Lug-All model 6000-15 only. Lug-All The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. ShoreLandr Per the official 6000-15SH parts list, the shaft snap washer (Part #671) is listed at reference position #17 with a quantity of two per hoist ” installed on the U-frame pawl shaft assembly to retain the shaft components in axial position within the U-frame. Also known as a C-clip, circlip, or snap washer, this spring-steel retaining component seats into a machined groove on the shaft and presents a shoulder that prevents washers, spacers, and the pawl assembly from migrating axially off the shaft under the cyclic loading of repeated handle strokes. J Harlen Co. On the 6000-15's large-frame U-frame assembly, which drives the ratchet engagement at up to 6,000 lbs of double-line capacity, the snap washers serve as the final retention step that keeps the U-frame pawl shaft fully assembled and functional. Without properly seated C-clips, the shaft assembly can develop axial play ” causing the U-frame pawl to shift out of its designed engagement angle with the drum ratchet teeth, producing audible skip, inconsistent load-holding, or eventual disengagement. The Lug-All service manual notes that only snap rings and locking pins securely lock the hoist together ” affirming that these small retention components are the final line of security for every shaft in the hoist assembly. When C-clips are deformed, overcompressed during disassembly, or simply lost during field servicing, they must be replaced before the hoist is reassembled and returned to service. Bairstow Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number671Part NameC-Clip (Shaft Snap Washer)Compatible ModelLug-All #6000-15 onlyQuantity Per Hoist2 clipsLocationU-Frame Pawl Shaft Assembly (#17 in parts list)Hoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsComponent CategoryShaft Retention / U-Frame HardwareCountry of OriginUSA

Installation Note Always replace both C-clips simultaneously ” the SKU 671 is used as a set of two. Never reinstall a C-clip that has been deformed, spread beyond its elastic range, or is no longer able to snap fully into its shaft groove. A properly seated C-clip will sit flush in its groove with no axial movement. Order SKU 671 today and keep the U-frame shaft assembly of your Lug-All 6000-15 properly retained at full 3-ton service.